China shock absorbers manufacturers teach you how to reduce exhaust emissions

          
Engine at work, carburetor and air filter dirty easily, because the dust on the road, in the air suspended particulate matter content increases.If encounter a sandstorm weather or dusty roads more serious.Air filter can only filter out airborne larger particles substance, but a lot of small particles matter is through the air filter, through the carburetor into the cylinder.Because there is a glial component in gasoline, when the engine working again, will be deposited in the carburetor tubing and pipe surface.The greatest impact is the carburetor hole. Because of its small pore size, high precision required,when the air of dust, dirt through the carburetor, the adsorption of gasoline will be deposited under the gum,hole becomes smaller, resulting in increased fuel capacity, so that combustible mixture, incomplete combustion, which is the engine idle speed and high idle exhaust emissions exceeding reasons.

China shock absorbers manufacturers teach you simple and effective way to solve this problem:

The first step,buy a can of carburetor cleaner, the air filter removed. As the cleaning agent to dissolve solidified on the surface of the parts carburetor gasoline gum, Just be cleaned easily removed. There are currently two types of carburetor cleaner on the market, the domestic price is cheap, but the low cleaning efficiency; price of imported high, but high cleaning efficiency.

The second step,the engine to reach normal operating temperature.

The third step,control the throttle to keep the engine in idle speed and medium speed under alternating operation at the same time,with carburetor cleansing agent small nozzle the amount of air to the carburetor hole and main oil supply device of air hole (in the eye can see) continuous spray 1-2 times, each time 1 to 2 seconds,then toward the carburetor throat spray cleaning, can achieve the purpose of cleaning the carburetor.

The fourth step,remove the air filter paper filter, the dirt surface of the destroyed or with a hair dryer blowing is ok.

For different situations should note the following:

(1).cleaning of the carburetor and air cleaner should be based on cars with mileage, road conditions. Recommends cars with 1000 km or half a month cleaned once. Doing so allows automobile exhaust standards, more environmentally friendly.

(2).Note that during the operation to prevent dirt falling into the carburetor. After repairing thorough governance exhaust, insist carburetor and air filter regularly clean and ensure that the car will not be a dirty carburetor caused excessive exhaust emissions.

This Article is being submitted on behalf of Best auto parts site. Get More detail about auto parts Information, please visit:china shock absorbers manufacturers and china car clutch plate manufacturers.