2014年1月7日星期二

china shock absorbers manufacturers introduce some common car maintenance errors

           Control arm manufacturers
Vehicle maintenance is exquisite technology, the maintenance process needs to be noted that there are a lot of places, but some owners found the car to go wrong, like yourself to repair, but not professional maintenance staff, the repair process will often use some errors repair method to repair the car, which led to his car even greater problem, the following china shock absorbers manufacturers introduce some common car maintenance errors.


1).Bake the tank bottom with a blowtorch.

Winter baking tank bottom with a blowtorch, not only will the engine oil additive chemical changes, lose their properties, but also cementation so that the engine oil tank bottom deformation, can cause fire. The best approach is based on the local minimum winter temperatures, Choose that meet the needs of the engine oil. In areas where conditions permit, The best vehicles parked in the garage.

2).Engine idling warming.

When using engine idling warming, due to the low speed, oil pressure is low, the various moving parts of the engine work in dry or semi-dry friction state; fuel atomization due to poor low temperature, so that unburned fuel (mixture) fleeing crankcase, wash away the oil film on the cylinder wall, will accelerate the mechanical wear and tear. So, a few seconds after the engine is started, the application of fast idle temperature (in modern cars have a dedicated fast idle device temperature rise after the machine will automatically adjust to the idle state), improve engine lubrication conditions.

3).Pump fan belt tight as possible.

The tighter the belt is not the better. Belt too tight will not only make it elongated or fracture, shortening the life of the belt, but also because of the tension is too large, leading generator shaft, pump shaft bending deformation will lead to bearing damage. Automotive engine fan belt tightness shall conform to the technical requirements, the belt assembly normal deflection 10-15mm is appropriate.

4).Engine is afraid of high temperature, not afraid of low temperature.

Some people think that when driving the engine is afraid of high temperature, not afraid of low temperature. In fact, the engine temperature is low also great dangers. Driving the car should be based on normal temperatures specified in the instructions, in order to ensure that the engine life.

5).Without replacing the engine oil.

Replace the engine oil is easy to overlook the problems, winter lubrication requirements of the various components of the car is higher, if still using summer oil must be replaced, the use of a longer time, the color black, poor adhesion the oil should be replaced to ensure the engine starts smoothly.

6).Water to clean the glass.

Meanwhile, glass cleaning fluid in winter usage, obviously would be less than in other seasons, but it can not be ignored, many owners prefer water instead of cleaning fluid , but in the winter, those substitutes often frozen, so winter do not use,Be sure to use does not freeze glass cleaning fluid.

For more detailed information on auto parts and vehicle maintenance, go to china shock absorbers manufacturers and china car clutch manufacturers.

Control arm manufacturers

没有评论:

发表评论