Automobile engine oil cooling system importance

China Shock Absorbers manufacturers teach you clean automobile engine oil cooling system importance.
Proffessional Installers offer the following information on cleaning automobile engine oil from a cooling system in internal combustion automobile engines. Occasionally, automobile engine oil and cooling system liquids are allowed to mix while an automobile engine is running. In certain situations, cleaning the oil from the system without removing all cooling system components may be successful.


The method described below is effective and should be implemented after the defective component has been repaired or replaced.
1).Prepare a mixture of dishwashing detergent and hot water. Use a rate of two ounces (dry measurement) of detergent to one gallon of clean water. Make sure to mix enough solution to be able to fill the entire cooling system.
2). Fill the cooling system from the highest point possible and allow for an air bleed to maximize the fill effort.
3). Start and run the automobile engine for a period of five minutes so stop the automobile engine and drain the entire cooling system. Repeat this procedure with fresh solution until all traces of oil have been removed.
4). After all traces of oil have been removed, fill the entire system again with clean water and start and run automobile engine for another five minute period.
5). Stop the automobile engine and allow ample time for the water to drain completely from the entire system.
6). Fill the cooling system with a 50 50 of antifreeze and clean water making certain to use only antifreeze recommended by that particular automobile engine manufacturer.

Failure to use the appropriate antifreeze or coolant may result in automobile engine component deterioration and result in premature automobile engine failure. Mixing incompatible coolants may also provide undesirable cooling system effectiveness and result in failures.

China shock absorbers manufacturers teach you how car maintenance is not wasted

China shock absorbers manufacturers remind Do not waste in vehicle maintenance.
Car owners should know to be "third repair, seven maintenance", maintenance of course can not let the car is never bad, but in the maintenance of the car, there are some car owners excessive maintenance, damaged cars. China shock absorbers manufacturers conservation experts tell you that the four waste conservation.

The first waste:

Maintenance too diligence. Miss white is a car blind, she often receive maintenance information sent by the dealer, new car before driving 8000 km, Miss white oil has been replaced three times, filters have been changed three times, 3,000 km service interval mileage is not to. Vehicle maintenance cycle refers to the time interval mileage or car maintenance. Maintenance of high frequency is not a bad thing, can more effectively protect the vehicle's performance, but too often it is not necessary. Scientifically determine the interval mileage all kinds of maintenance work, make the car kept in good technical condition, but also save maintenance costs and repair costs.

The second waste:

The pursuit of high-grade gasoline. Mr. Bruce grade of gasoline that the higher the better, the past two years have been added to the vehicle 97 gasoline. General car owners know that if long-term use of low-grade gasoline high-grade cars,In addition to produce the shaking, it will also produce such as power down, increased fuel consumption, damage to internal engine parts and other issues, seriously shorten engine life. Therefore, many owners prefer to use a high-standard oil. In fact, gasoline label is not better, even luxury cars does not mean to be heightened standard oil.

The third waste:

Tire to be imported. Some people prefer to buy tires special emphasis on "import" foreign launch of the new tire does not apply to domestic users. On one occasion, Mr.Jones's new for mountain tires ran only once, sidewall on the break. Foreign and domestic road pavement has a very different level of imports in the domestic tire on the road is not necessarily a good performance, especially in terms of impact-resistant sidewall apparently some acclimatized. Some foreign brands in the domestic tire manufacturing joint venture, are based on road conditions in the domestic side of the tire cord fabric adds a layer, thereby greatly enhancing the impact force sidewall, joint production of tires in performance can completely replace the imported goods, and the price is more affordable.

The fourth waste:

Automotive engine too much oil. Mr. Wade's car just after the first 5000 km warranty, Mr. Wade does not see the dipstick, some time ago ran 2,000 km of high-speed, fear the oil will be not enough, it will be a friend to send a bottle of oil to add into it. Surprisingly, not long after, his car started burning oil. This is because Mr. Wade's car in the oil too much. Engine at work crank handle, connecting rod big end will produce violent agitation, the internal power loss of the engine increases, so that further increase in oil splashed on the cylinder wall, resulting in burning of oil failure. Engine oil sump should be controlled between standard reticle dipstick as well.

For more detailed information on auto parts and vehicle maintenance, visit the provider China shock absorbers manufacturers and car clutch manufacturers.

Control arm manufacturers teach you clean automobile engine oil cooling system importance.-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

Control arm manufacturers teach you clean automobile engine oil cooling system importance.-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

Automotive wheel is very important

China shock absorbers manufacturers think it is very important to maintain the wheels.Mentioned car maintenance, many owners think of the engine and tire maintenance, vehicle wheel will not maintenance it, but we need to know the quality of the wheel, the relationship between the quality of car tires, which relates to the safety of our lives Therefore, we need also the hub maintenance, so if improper maintenance because our wheels appeared damaged, how do we fix it?

Precautions during routine maintenance wheel:

1, when the high temperature wheels, wheels should be allowed to cool before cleaning, do not use cold water to wash; otherwise cause damage to alloy wheels, and even the brake disc deformation affecting braking effect. In addition, at high temperatures with detergent to clean aluminum alloy wheels, make wheels surface chemical reactions, loss of luster, affect the appearance.
2, when stained difficult to remove dirt on wheels, if the general cleaning agents to no avail,used to try to clear brush, but do not use strong brush, especially iron brush, so as not to damage the hub surface. Some experts have introduced a clear dirt remedies: the selection of medicinal "active oil" rubbed, get unexpected results, the owner may wish to try.

Minor scratches can repair itself:
The first step: to clean up the wheel. We can use the paint diluent, wipe the scars around to remove dirt. Scratch the deepest part of the dirt is difficult to remove, then can be used toothpicks to get it completely clean. In the clean-up time, in order to prevent the mistake irrelevant by painting the tape affixed best carefully around the scar.

The second step: the car owners tidy writing brush tip, the damage to the wheels where painted modified paint, then paint dried, painted a slightly protruding in some ,car owners to facilitate observation.

The third step: the owner until the paint is completely dry after modification, dipped in soapy water with a water-resistant coated paper to make the surface smooth. Then use the mixture clashes bright, the last resort to waxing.

The fourth step: the car owner If you find a deeper scars on wheels, but be sure to observe the metal surface is exposed, if invisible metal surface,it's not rust, you can concentrate on modifying painted lacquer. Place the pen tip up a little bit, and then wait for the paint to dry completely. If you find exposed metal, and then immediately replaced.

For more detailed information on auto parts and vehicle maintenance, visit the provider China shock absorbers manufacturers and china car clutch manufacturers.

Control Arm Manufacturers teach you the proper use of brakes

Control Arm Manufacturers teach you the proper use of brakes.
How often one of the most suitable replacement brake pads. This is a difficult question to answer. In addition to comparing provincial brakes often long distances, the most important is the driving style it properly, such as the amount of driving ahead, if we can have a good grasp, you will find that a lot of the time there was no need to step on the brakes. In general, a brake pad with 100,000 km no problem, if used well, can even reach 150,000 km.

Replacing brake pads.

Since each driver brakes frequency is not the same, it is difficult to define how long the brake pads need to be replaced once. The only way is, when a routine check to see if the brake pads wear, if reached a critical point, you have to immediately replace it.
Disc brake brake pads replacement is relatively simple. Remove the tire, release the brake caliper screws, you can win brakes, then put the new, the whole process up to five minutes and does not require any adjustment.
Replacement drum brake slightly harder, need to remove the wheel, then remove the brake drum, and then to replace the brake pads, pay attention to the coincidence of the new brake pads and drum brake between, if not coincidence, and sometimes need polished; when assembled, the need to adjust the gap between the brake pads and the brake drum. In short, this is a somewhat technical content of work.

Driving the right way to increase the life of brake pads.

Encountered a small problem slam on the brakes, which is driving poor people's favorite, but is actually an accident risk. I believe you may have this experience: in front of the car runs good, the road ahead is nothing wrong with children, who suddenly brakes in front, which makes the back of the car caught off guard, great rear-end possible. This is a typical killers.
In addition, there are people in the driving process, the foot only two options: Come on, hit the brakes. Brakes frequency reached a very high level. In fact, many such people. The result of doing so is naturally 2-3 million km, you have to change a brake pad.
Driving the right way to keep in concentrate, concentrate, find problems early deceleration, changes according to the situation to decide whether the brakes. Doing so can save gasoline, but also extend the life of brake pads.

For more detailed information on auto parts and vehicle maintenance, visit the provider control arm manufacturers and car clutch manufacturers.
http://day7salary.mywapblog.com/control-arm-manufacturers-teach-you-the.xhtml

China Shock Absorbers Manufacturers teach you the benefits of cleaning the tank

China Shock Absorbers Manufacturers teach you the benefits of cleaning the tank.
Do not pay attention to the daily car brake failure resulting in vehicle maintenance problems, many owners do not know the importance of normal maintenance. In fact, do not pay attention to maintenance will cause many problems, the fuel tank problem is one of them, and many owners have mistakenly thought that the  fuel tank is completely closed state, there is no need for maintenance.But it's not.

Failure Case I: Tank wash out tinfoil.
Not long ago, Mr. Lin to the 4S shop car wash owners, staff recommends. Mr. Lin to do something to clean up the tank car. Lin may wonder: are generally enclosed tank, you also need to clean it? In the cleaning process, so he was surprised there may otherwise content, gum, water, particulate matter, and even the plastic film, foil, grass and sticks, etc.

The solution I: regular cleaning establish health awareness.
In this regard, professionals recommend owners who regularly do a tank cleaning is necessary, and this is for the car to establish a kind of "health" awareness, preventive measures.
  When to refuel, if you see there being loaded oil tank truck unloading, it is best to immediately other gas station, because a lot of ground deepened storage tank refueling, which would precipitate impurities are long flips, then refuel , is bound to add to the car passing these things; there when the workers to the car when the additive, the foil on the bottle into the tank are inevitable. So it seems, a regular tank cleaning or necessary.

Failure Case II: fuel consumption is climbing.
After driving the car owner Bruce recently discovered some time, the car's fuel consumption is climbing, driving, when the car will occasionally produce jitter, unlike the original as stable.

Second solution II: 30000-40000 km once the oil cleanup.
Front Desk Supervisor White Toyota 4S shop explained that the structural design of the tank, it can play a waterproof, thermal insulation effect. With a car engine fuel tank vents, as well as the oil canister connected to the mailbox and to each driving 30,000 -4 million kilometers in the car when carried the oil cleaning, or replacement of filtration. Otherwise, once the oil plug, fuel tank pressure is too large, driving in the car will have a swinging phenomenon, after the formation of a strong high-pressure tank is particularly easy to crack, even spill occurs, fuel consumption will follow large increase.
White also recommends regular maintenance to keep the oil the oil unobstructed, you can use some cleaning detergent, which also helps to break down the oil pipeline contaminants and impurities.

Failure Case III: Car acceleration weakness.
Recently, the car owner Miss Daisy felt relatively slow acceleration, the car seems to be no oil in general, not to mention the car obviously felt awkward, Qi weakness.

Second solution III: Do not wait until the fuel runs out before refueling
Miss Daisy check pump problems, the slot. Head white explained by appropriately operating the fuel pump is supplied to the engine. Once the air vents will generate a negative pressure in the fuel tank, the fuel pump so that the vapor lock phenomenon, which is the difference of oil, not even for the oil. The fuel pump does not work smoothly cause is the bottom of the sedimentation tank clogging impurities and excess water charge. Supply, throttle acceleration will reduce the car accelerates slowly not run.
Toyota 4S technical expert James reminds the car owner, you must not wait until bedtime often refueling lights. Too little savings or running out of fuel, it will continue to work if the fuel pump causing the temperature is too high, it will affect the life of the pump, the pump may even burn.

Engine cleaning every six months.
An automobile engine is the heart of a very important and critical component assembly.
The first is the dissection. If there is no washing or longer, before use of the vacuum cleaner to clean the sink windshield dirt and debris. Next is clean engine compartment is best cleaned once every six months.
Great to remind you, do not do it yourself, or just let the water rushed into the engine nacelle general washing rinse water cannons. Use a professional cleaning of the engine and engine compartment external absorbing sponge to clean the engine compartment. The best film coating to the engine, can fully guarantee the engine compartment interior plastic parts and electrical lines are not easy to aging, reduce engine noise, dust and sludge is not easy, but let their cars in the car 4S shop maintenance.

For more detailed information on auto parts and vehicle maintenance, visit the provider China Shock Absorbers Manufacturers.

Why the cold winter vehicle is difficult to start?

With the advent of the cold winter, many vehicle owners would face difficult to start trouble, and sometimes even started, the engine will be a serious shake, or even turn off the phenomenon will occur, affecting normal driving. In fact, whether it is winter or summer, when the cold start, they should be "warm-up exercise."
The car is not easy to start the causes and precautions in winter.

The car is not easy to start the causes in winter:

1).Nozzle dirty. Vehicle after a period of time due to external dust from entering the combustion process and the chemical reaction site in the nozzle can easily dirty, dirt may clog the normal fuel injection quantity, the impact sensitivity of perception of the injector, resulting in gas atomization bad, so that the ignition delay time, the phenomenon appears difficult to start the vehicle.

2).The battery power is low. The most direct impact on the city's family car battery in winter. At low temperatures, the power consumption will be significantly larger than the other car season, also because of the battery capacity becomes low temperatures reduce battery use a long time, there will be an initial start-up voltage is low, such as the battery surface adhesion of dirt will the voltage output instability, resulting in the case body shake. If the winter is approaching, timely supplement battery power, or replace them with new batteries, can effectively avoid this situation.

3).Low fuel quality. Higher viscosity oil in the winter, not evaporate, it has a certain influence on the heat of combustion, while the irregular gas stations, fuel quality is not guaranteed, resulting in lack of motivation. Therefore, we recommend a regular gas station owners to choose, do not be cheap plus cheap oil.

4).The engine oil flow is blocked. This is more evident in the extremely low temperatures in northern cities. In winter, the viscosity of the oil will become larger, the oil flow is also more difficult, so that the engine resistance increases, which resulted in the car in the winter cold start problems. In such cases, emergency vehicles approach is to put a warm environment, you normally start after a period of time. But if you want to solve, it is best to do a professional franchise stores winter maintenance, and replacement of the oil according to local circumstances.

5).The exhaust pipe from freezing. Because cars do not often use, water vapor after combustion engine in some parts of the exhaust pipe to freeze, but not enough to make these short ride to melt ice, over night and then end up with a more ice. Over time, it will have an impact on the vehicle's starter and exhaust.

The car is not easy to start the precautions in winter:

1).note demisting. Winter cold weather large difference in temperature inside the car, appearing on the automotive glass fog will drive a lot of problems, particularly around the front of the windshield and the front windows. Thus, the winter fog lane clarity is particularly important to keep the glass in the glass should be cleaned before traveling.

2).to prevent freezing. Situation in the cold winter frost frozen glass is very common, which is mainly caused by the temperature difference between inside and outside the car. If using hot water will damage the paint, severe cases may also cause the glass burst. With cold water but also detrimental to the paint, but after the frost may be more serious. The correct approach should be open car heater, with special de-icing spatula, slowly cleared.

3).starting and braking techniques. Winter driving starting and braking skills are also important, especially for the novice or friend to drive a manual transmission car. Icy road surface when the tire and the road surface reduces friction, reduce adhesion, easy slipping or idling. When driving a manual transmission vehicle, start some gentle refueling, advance slowly decelerating winter driving safety principles.

For more detailed information on auto parts and vehicle maintenance, visit the provider china control arm manufacturers and china car clutch manufacturers.

Control Arm Manufacturers teach you how to carpooling-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

Control Arm Manufacturers teach you how to carpooling-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

Proper maintenance of automotive engine

Yesterday saw a report, saying that Ms. White buy a new BMW X3 for the first time on the road that is stalled on the highway, so they requested that the 4S shop to replace the car, because there is no good communication, so the 4S shop door blocked, and called a number of media interviews. Night, 4S shop finally persuaded Ms. White checked the vehicle and found the reason turned out to be no oil.
Here is an Audi car owners, car dashboard never see, once in highway driving, do not look at the water table, high temperature do not know, the last flameout shut down, never not move, no way to call the Audi 4S stores , the car was towed to the repair shop, a check engine to overhaul, the owner suddenly scared into a cold sweat.

Since the find of the above, then how do we properly maintained engine:
1).Using the appropriate level of quality lubricants. Gasoline engine should use SD-SF gasoline engine oil into the exhaust system in accordance with attachments and conditions of use; diesel engines will have to use CB-CD diesel engine oil level according to the mechanical load, a standard not lower than the manufacturer requirements prevail.

2).Three filter maintenance: Three filter is the air filter, oil filter and fuel filter. Three filter in the car engine for air, oil and gasoline plays a filtering effect, which play a protective effect on the engine, but also improve the efficiency of the engine.

3).In time to replace the oil and filter. Any quality grade lubricants in use, the oil will be changed, in order to avoid the occurrence of faults, use a combination of conditions, timely oil changes, maintaining a moderate amount of oil (generally dipstick upper limit as well).

4).Regular cleaning of the crankcase. During operation of the engine, the engine room without combustion gas, acid, water, sulfur and nitrogen, through the gap between the piston ring and cylinder wall into the crankcase, the metal powder mixed with the wear parts produced, the formation of sludge. Therefore, the crankcase should be cleaned regularly to keep the engine clean inside.

5).The engine water tank rust, dirt is the most common problems. Dirt followed coolant flowing in the cooling system, reduces cooling effect, resulting in engine overheating, and even cause engine damage. Therefore, the tank should be cleaned regularly to remove rust and scale them.

6).Regular cleaning of fuel systems, controls coke formation, enabling the engine to maintain the best condition.

7).To keep the crankcase ventilation. Now most of the gasoline engine are equipped with PCV valve (positive crankcase ventilation), but channeling gas pollutants are deposited around the PCV valve, the valve may be clogged. Therefore, subject to periodic removal PCV valve pollutants.
 
For more detailed information on auto parts and vehicle maintenance, visit the provider China control arm manufacturers and car clutch manufacturers.

China Control Arm 48069-59095,48068-05050,48069-05050,48610-35040,48630-35020,48069-20380.48068-20380,48630-60010,48610-60030,48640-60010

  


China Control Arm 48069-59095

Parts Number:48069-59095

Parts:China Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA YARIS (_P9_)

China Control Arm 48068-05050

Parts Number:48068-05050
Parts:China Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA AVENSIS Liftback (_T22_)
            TOYOTA AVENSIS (_T22_)
            TOYOTA AVENSIS Station Wagon (_T22_)
            TOYOTA AVENSIS VERSO (_ACM2_)

China Control Arm 48069-05050

Parts Number:48069-05050

Parts:China Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA AVENSIS Liftback (_T22_)
            TOYOTA AVENSIS (_T22_)
            TOYOTA AVENSIS Station Wagon (_T22_)
            TOYOTA AVENSIS VERSO (_ACM2_)

China Control Arm 48610-35040

Parts Number:48610-35040

Parts:China Control Arm
Description:Front Axle, Right, Upper
Application:TOYOTA LAND CRUISER PRADO (_J9_)
            TOYOTA 4 RUNNER (_N130)

China Control Arm 48630-35020

Parts Number:48630-35020

Parts:China Control Arm

Description:Front Axle, Left, Upper
Application:TOYOTA LAND CRUISER PRADO (_J9_)
            TOYOTA 4 RUNNER (_N130)
            TOYOTA 4 RUNNER

China Control Arm 48069-20380

Parts Number:48069-20380

Parts:China Control Arm

Description:Front Axle, Left
Application:TOYOTA CELICA (ZZT23_)

China Control Arm 48068-20380

Parts Number:48068-20380

Parts:China Control Arm
Description:Front Axle, Right
Application:TOYOTA CELICA (ZZT23_)


China Control Arm 48630-60010

Parts Number:48630-60010

Parts:China Control Arm

Description:Front Axle , Left , Upper
Application:TOYOTA PRADO (_J10_)

China Control Arm 48610-60030

Parts Number:48610-60030

Parts:China Control Arm
Description:Front Axle , Right , Upper
Application:TOYOTA PRADO (_J10_)

China Control Arm 48640-60010

Parts Number:48640-60010

Parts:China Control Arm

Description:Front Axle , Left , Lower
Application:TOYOTA PRADO (_J10_)

if you have any questions ,please visit China Control Arm Manufacturers

http://www.domoautoparts.com/?m=news_view&id=102

Check the tire pressure tire maintenance tips

Winter, with increasingly cold temperatures, the vehicle is also facing the cold test. "How good winter car maintenance work" has become the major puzzles many car owners. Autumn and winter car care needs to pay attention to the following five main areas:

1).to prevent electrostatic.
In general, the car electrostatic is derived from the  friction fabric, especially chemical products easier triboelectric, so when choosing seat covers, cushions and mats and other supplies, the best use of leather, wool or cotton products. We all know that the wax has anti-static effect, of course, various different types of wax anti-static capabilities, you can use a special anti-static wax.

2).check the tire pressure tire maintenance.
Rubber tires, because lower temperatures will harden brittle, will reduce friction, leakage, broken tire situation prone. In the summer, due to high temperatures, the tire pressure is not too high. In contrast, the winter because the temperature is relatively low, the tire pressure must supplement. Always check the tires and whether significant trauma, scratches, etc., where the tread should always clean up the debris.

3).the ventilation system cleaning.
Winter is the high incidence of allergic rhinitis and seasonal asthma. If you are allergic to dust and pollen, the best filter is installed in the air conditioning system so that dust, pollen and bacteria will not enter into the car.
Further, the air circulation is very important automobile directly affect the quality of air in the car. If you want to detect the speed of the car air circulation can make yourself a little experiment: in the blockade of multiple compartments simultaneously lit cigarettes, two minutes later, the car filled with a thick smoke. At this point, the air circulation system to start the car, if in less than 30 seconds, the car could not see the smoke, the air circulation system proved an excellent vehicle operating conditions.

4).external maintenance: focus on clean. 
Winter day in the morning, dew more cars are often very wet surface, the surface of the vehicle if there is a significant scratches, paint treatment should be done in time to avoid scratches and rust damp parts, in addition, because of the erosion of acid rain in summer Rain and summer strong direct light, car paint will inevitably be oxidized. In winter, when the car owners are the best to do a thorough cleaning of the surface of the car, from cleaning, polishing to waxing.
When washing the car, use a dedicated car wash liquid, because the use of detergent or soap will cause the paint to lose luster, but also a serious erosion of the paint.

5).the internal cleaning.
In addition to cleansing the body, but also pay attention to clean car interiors. You can use a towel or sponge with soap or detergent, scouring every corner of the dashboard. Chemical fiber cloth to clean the surface prior to first use a vacuum cleaner to suck the dust, then use special textile cleaner infiltration minutes, until the dirt is dissolved, then towel to scrub clean. If there is no special cleaning agents can change with soap or dishwashing liquid. Leather products with a towel stained with a little water scrub.

For more detailed information on auto parts and vehicle maintenance, visit the provider car control arm manufacturers and car clutch manufacturers.

Control Arm manufacturers to teach you driving experience-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

Control Arm manufacturers to teach you driving experience-China car parts suppliers,Car Clutch,Control Arm,Shock Absorbers--TAIZHOU DOMO IMPORT & EXPORT CO.,LTD.

How to drive more fuel-efficient

For the cost of vehicles, the petrol money will cost a small fortune. Learn how to drive fuel-efficient, the car owners, are very practical. Today, I will introduce some simple and practical tips how to drive fuel-efficient.
Many owners often ask the same car, the same distance, and why others are fuel-efficient than I do? Low fuel consumption actually have a great relationship with the driver's driving method, the same car, different driver to drive , fuel consumption can be a difference of 8% -15%, then today would be to introduce some common driving skills.

Soft start.

The vehicle's engine starting is directly related to fuel consumption,The more the number of starts, the more fuel consumption.So start saving fuel quality is an important part. When the vehicle is started, choose to resist, smooth filling, slow acceleration. Gear when the car reaches a certain speed, learn to listen to the sound of the engine to gradually change the gear from low to high. This can reduce the heating time of the engine, increases fuel efficiency. Do not mess throttle to avoid fuel Depletion, quite accurately to tie the car clutch, throttle control moderate done naturally smooth start to accelerate evenly, so that both can be fuel-efficient, but also can reduce engine wear. If you step on the throttle when starting to accelerate, it will not only hurt the car will greatly increase fuel consumption.

How to change the speed Guadang.

For manual transmission cars, the first gear is starting gear, the car can be linked to second moving gear, do not let Bigfoot throttle speed increases. Many of my friends have put the accelerator when driving habits, if you put the throttle, the engine speed will cause the sudden drop in and play the role of resistance led to offset part of the driving inertia and make the car a "flutter", leaving the fuel consumption increases, here recommend their owners' Qingtai throttle. "Furthermore, the shift in time when the need for fast, especially when driving on a slope, the shorter the time shift, the vehicle dynamic play the better, the more you can save fuel.

Driving at a constant speed
Uniform speed is the minimum speed for fuel consumption. Car on the same road exercise, different speed, fuel consumption is also different. Therefore, only when a speed of the vehicle, the fuel consumption to a minimum. So automobile uniform speed limits, so you can save fuel.
General economic speed of cars between 65 ~ 90km / h. When the car is running when the economy is the most fuel-efficient speed. Whether the speed is too high or too low on fuel are negative. When the vehicle speed is low, the piston velocity is low, the combustion is incomplete. When the vehicle speed is high, the intake air speed is increased resulting in increased intake resistance, which makes the fuel is increased. In addition, studies show that relative to the economy each additional kilometer per hour speed, fuel consumption will increase by 0.5%.

Avoid frequent lane change.

Many big cities traffic jam situation will occur, and some experienced drivers are between the starting point and destination and select one of the least congested route. For this proposal the owners friends who plan ahead route, pay attention to local traffic information and road conditions to avoid congested roads. Because of reduced vehicle start, stop, according to the economic speed driving, which is tantamount to save you fuel. Also, many owners friends will often change lanes on the road, and you not only to acceleration, deceleration and distance traveled is no straight line distance is short, so this is one of the reasons the fuel consumption increases.
 

For more details Driving Tips, visit Control Arm manufacturers 

Control Arm 48069-29115, 48069-20160,48068-20160,48069-07030,48630-0K020,48610-0K020,48068-07030,48068-0K010,48069-0K010,48068-59095

 
Control Arm 48069-29115

Parts Number:48069-29115

Parts:Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA CRESSIDA (RX90) 1989-1994

Control Arm 48069-20160

Parts Number:48069-20160

Parts:Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA CELICA (ST16_)
            TOYOTA CELICA Convertible (_T16_)

Control Arm 48068-20160

Parts Number:48068-20160

Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA CELICA (ST16_)
            TOYOTA CELICA Convertible (_T16_)

Control Arm 48069-07030

Parts Number:48069-07030

Parts:Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA AVALON MCX20 1998-2004
            TOYOTA SOLARA ACV20, MCV20, SXV20 1999-2003

Control Arm 48630-0K020

Parts Number:48630-0K020

Parts:Control Arm
Description:Front Axle , Left , Upper

Application:TOYOTA INNOVA TGN41..GCC; KUN40, TGN40 2006

Control Arm 48610-0K020

 

Parts Number:48610-0K020
Parts:Control Arm
Description:Front Axle , Right , Upper
Application:TOYOTA INNOVA TGN41..GCC; KUN40, TGN40 2006

Control Arm 48068-07030

Parts Number:48068-07030

Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA AVALON MCX20 1998-2004
            TOYOTA SOLARA ACV20, MCV20, SXV20 1999-2003

Control Arm 48068-0K010

Parts Number:48068-0K010

Parts:Control Arm
Description:Front Axle, Lower, Right
Application:TOYOTA INNOVA TGN41..GCC; KUN40, TGN40 2006


Control Arm 48069-0K010

Parts Number:48069-0K010
Parts:Control Arm
Description:Front Axle, Lower, Left
Application:TOYOTA INNOVA TGN41..GCC; KUN40, TGN40 2006

Control Arm 48068-59095

Parts Number:48068-59095
Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA YARIS (_P9_)

For more details control arm, visit control arm manufacturers

Driving in fog days Precautions

Due to low visibility and fog weather, car drivers need to bring a lot of change, driving in low visibility, little attention might accident, so many drivers complain about. Then, in the rain and fog weather car needs attention?, Which has several sections of rain and fog weather requires special attention? Look at experts Weapon!
When driving in fog, in strict compliance with traffic laws driving the speed limit, do not drive fast. Fog greater the shorter the viewing distance, speed should be lower. Upon entering foggy areas also need to advance deceleration is likely in front of accidents.

First class: long downhill section and more dangerous in the fog
According to reports, the long downhill section also special weather conditions often prone sections, plus passing a long downhill section, many motorists are often used for a long time to slam the brakes, that could lead to brake failure, coupled with the brake sensitivity under foggy conditions fall; Therefore, when fog downhill, do not rely solely on the brake deceleration, but also choose a low gear deceleration; Also never allow neutral slide or glide flameout.

Expert Weapon: fog via a long downhill section, should strengthen the observation, slow down smoothly through, do not have an emergency braking. In case of a traffic jam ahead, do not try to change lanes.

The second category: "S"-shaped rear-end road easily happen in the fog
Via the "S"-shaped path, spacing before and after the car difficult to control, and therefore very prone to rear-end accidents.

Expert Weapon: via "S" shaped road vehicles should try to avoid the early morning and midnight fog multiple times; such as entering a foggy area, you should try to use low beam lights, so that you can see the ground marking, marking along to maintain direction and prevent deviation; in an uncertain situation when the front, with a good car horn is also important to prevent rear-end accidents.

The third category: Sharp turn sections fog obscured the sight
When driving on weekdays, a sharp turn road belonged to the accident-prone locations, plus fog blocking the line of sight is not good, even if only in a sharp turn sections of thin mist, it is actually a hidden hazard.

Expert Weapon: sharp turn in foggy weather road while driving, do not pedal to the metal, not anxious to fight the emergency brake and steering wheel. If you think it takes to reduce the speed, first slowly loosen the throttle, and then successive light brakes to control the speed of the goal.

The fourth category: near the lake road most prone to fog
Older drivers often travel by car often have such experience, fall and winter seasons when passing near the lake road, easily met strange fog - a group of a group, like a big balloon floating, sometimes there, sometimes not, the driver finally get rid of a mass of fog, the thought may be relaxed, but the next fog but inadvertently falls, and so when you realize that there is fog, the fog has entered the center of it.
According to reports, strange fog appeared in a large temperature difference between day and night, no wind in the morning, sometimes in the evening will occur. So, winter driving, especially when the car early, to have fully prepared. Now is the strange fog-prone season, in fact, is a strange fog radiation fog, water vapor partial caused by radiation cooling, there is a "killer road" said.

Expert Weapon: When driving, observe the front, if you have strange fog occurs when the line of sight is not good, you should immediately slow down, to ensure a smooth parking of vehicles. Before entering the strange fog, such as distance and speed can meet the varying road conditions in the premise of ensuring safety, turn lights, slow down into the far right lane. The purpose of doing so is that in case of an accident traffic jam ahead, quickly clued into the emergency lane by avoiding the occurrence of car rear-ended.

For more detailed information on auto parts and vehicle maintenance, visit the provider control arm manufacturers and car clutch manufacturers.
http://day7salary.mywapblog.com/driving-in-fog-days-precautions.xhtml

How car maintenance more effective, experts teach you tips

When it comes to vehicle maintenance, many owners have a headache: Why spend so much money every year to do maintenance, but the car is still getting old? This may be caused by inappropriate maintenance methods. Here are some owners summary maintenance errors, hope everyone can learn from.

1. Under the hot sun washing - hurt the paint
Many private car owners prefer to wash in the hot sun, that this will soon be washed and dried the car body of water. Actually the wrong, and wash in the hot sun, the effect of water droplets formed by the lens will paint the top local high temperatures generated, over time, the paint will lose luster. If at this time waxing, body color is also likely to cause uneven. So, car washing and waxing is best when there is no sun conditions, if not guaranteed, it is best to choose a cloudy or sunny in the morning, in the evening proceed.

2. Frequent washing - harmful air conditioning
Encounter weather temperatures, dust increased, car body easy to dirty, wash car the frequency began to rise, but to note here is that we must maintain the appearance of automotive air conditioning dry, do not care if the car air conditioner is wet, it will affect automotive air conditioning lifetime.

3. Circling approach waxing - the effect is very poor
When a lot of people to the car waxing, habitually waxing circular fashion, this is not the right approach. Waxing is the right way to a straight line, alternating horizontal and vertical lines, so as to achieve the paint surface to produce good results.

4. Too much oil - prone to failure
When insufficient engine oil, bearing and journal due to less friction and poor lubrication oil, increased wear, and even lead to burn Wazhou failure. However, if too much oil, the engine crank handle, the big end of the connecting rod will produce vigorous agitation at work, not only increases the internal engine power losses, but also so that the oil spill on the cylinder wall increases, resulting in failure of burning oil . Therefore, the engine oil sump should be controlled on the dipstick, and between the lower engraved lines as well.

5. Screws too tight - permanent deformation
With bolts, nuts, fasteners connected a lot, should ensure that they have sufficient preload on the car, but not over tighten. If tightened too much, on the one hand make connections permanent deformation; hand will allow the bolt to produce tensile set, but decreased preload, and even cause slipping or broken phenomenon.

6. The new battery is not charging - shorten the life of
Charging the battery for the first time is called the initial charge and the initial charge has a great impact on the battery life. If you do not charge the battery capacity is not high, shortened life expectancy; If direct charging will shorten the life. Initial battery charging is normally After filling in the electrolyte, with a small current charging takes approximately one hour to install and use.

7. Vehicle equipment modifications - affect driving safety
For comfort and luxury car owners is understandable, but some car owners to install yourself in a variety of devices, such modification, if not handled properly, the car performance and convenience and reliability of manipulation often adversely affected, easy to leave sequelae or affect driving safety.

8. Cooling water temperature is too low - engine wear
When the weather is hot, and some owners in order to prevent the engine temperature is too high, insisting the cooling water temperature as low as possible; in order to achieve the purpose of cooling, remove the thermostat, these practices are wrong.

9.Long-term without cars or often short drive - easily damaged parts
While some people become car owners, but usually "not willing" to drive only when the holiday driving out to play, in fact, the way this car is very hurt car. Surface, such as engine and transmission components because often in direct contact with air and rust, will affect the battery life is not used. The best way is to run a car every few days, running three to forty minutes. In addition, a short car will always hurt the car, he drove far, is an important reason to hurt the car.

Proper maintenance, the right way to make your car like new. In addition, the purchase of auto insurance can minimize losses when your car accident. Here recommend a reference only.
 

For more tips on auto parts and car maintenance and repair,please go to control arm manufacturers and car clutch plate manufacturers.
http://day7salary.mywapblog.com/

Control Arm 48067-29075 ,48069-12250,48068-12250 ,48069-19045,48068-19045,48069-19125, 48068-19125,48068-05070,48069-05070.48068-29115

Control Arm 48067-29075

Parts Number:48067-29075

Parts:Control Arm
Description:Front Axle, Left, Upper 

Application:TOYOTA HIACE IV Wagon
            TOYOTA HIACE IV Box
            TOYOTA HIACE V Wagon


Control Arm 48069-12250

Parts Number:48069-12250 

Parts:Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA COROLLA (_E12U_, _E12J_)
            TOYOTA COROLLA Estate (_E12J_, _E12T_)
            TOYOTA COROLLA Saloon (_E12J_, _E12T_)

Control Arm 48068-12250

Parts Number:48068-12250
Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA COROLLA (_E12U_, _E12J_)
            TOYOTA COROLLA Estate (_E12J_, _E12T_)
            TOYOTA COROLLA Saloon (_E12J_, _E12T_)

Control Arm 48069-19045

Parts Number:48069-19045

Parts:Control Arm
Description:Front Axle, Left
Application:TOYOTA CAMRY (_V2_)
            TOYOTA CAMRY Station Wagon (_V2_)

Control Arm 48068-19045

Parts Number:48068-19045

Parts:Control Arm
Description:Front Axle, Right
Application:TOYOTA COROLLA Hatchback (KE, TE)
            TOYOTA COROLLA (KE)
            TOYOTA COROLLA Combi (KE)
            TOYOTA COROLLA Coupe (KE)

Control Arm 48069-19125

Parts Number:48069-19125
Parts:Control Arm
Description:Front Axle, Left, Lower
Application:TOYOTA COROLLA Hatchback (_E7_)
            TOYOTA COROLLA (_E7_)
            TOYOTA COROLLA Station Wagon (_E7_)

Control Arm 48068-19125

Parts Number:48068-19125

Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA COROLLA Hatchback (_E7_)
            TOYOTA COROLLA (_E7_)
            TOYOTA COROLLA Station Wagon (_E7_)

Control Arm 48068-05070

Parts Number:48068-05070

Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA AVENSIS VERSO (_ACM2_)
            TOYOTA AVENSIS (T25)
            TOYOTA AVENSIS Saloon (T25)
            TOYOTA AVENSIS Estate (T25)

Control Arm 48069-05070

Parts Number:48069-05070

Parts:Control Arm
Description:Front Axle, Left, Lower TOYOTA AVENSIS VERSO (_ACM2_)
Application:TOYOTA AVENSIS (T25)
            TOYOTA AVENSIS Saloon (T25)
            TOYOTA AVENSIS Estate (T25)

Control Arm 48068-29115

Parts Number:48068-29115
Parts:Control Arm
Description:Front Axle, Right, Lower
Application:TOYOTA CRESSIDA (RX90) 1989-1994

More control arm information, please visit control arm Manufacturers 

Contact：

Email:bruce@domoautoparts.com

Web:http://www.domoautoparts.com/

Automotive interior maintenance experience

A clean and fresh, bright and comfortable driving environment, not only to prolong the life of the interior, but also can effectively improve driving mood. Car maintenance is very important, on the vehicle interior maintenance experience to do a summary.

1, Car seat
Part of the general vehicle seat occupied most of the area inside the car, but also one of the most touching part of the owner. When the seat is not dirty, it is recommended to use long-haired brush and vacuum cleaner with strong suction, while brushing aside the seat surface dirt with a vacuum cleaner to suck out.
Luxury cars use more leather seats, comfortable and was noble, and longer service life. Leather is a natural thing, it naturally can not underestimate maintenance. Common chemical cleaning agents do not use the best leather seats, should use alkaline cleaning agents, such as soap and water, washed cotton paper towel.
For fabric fabric seats, treatment is relatively simple. Buy a new car at the time suggested it be cleaning and maintenance, and be sure to immediately dry, so do not leave water stains inside. Spend more time with a professional cleaning agent protection, such as accidentally dropping a juice or coffee colored liquid, we recommend that you promptly washed off in order to keep the car clean and tidy.

2, Car dashboards
Each occupant will directly face the dashboard is an important part of the vehicle interior, the dashboard is clean is an important part of checking the car is clean. Note dashboard will find difficult with only rags and sponges clean dashboard, where these various obstacles need to use "special tools" to clean up. An ordinary car beauty shop will have to clean the interior of the vehicle sales tools, such as cleaning up the air vents in special cleaning strips.
In addition, the dashboard mostly plastic material, the sun's ultraviolet irradiation and ozone in the air, a long time plastic material will be aging, embrittlement, cracking phenomenon. To alleviate the aging of these plastic parts, usually to protect clean water can be coated with a layer of wax on the dashboard. Water wax can effectively extend the service life of plastic materials.

3, Vehicle carpets
Inside the car is most likely to dirty the carpet. Luxury car comes with carpets and cars are basically linked together, is not easy to remove for cleaning, it is usually best to place mats activities in the car. If the Ottomans dirty words, directly out of the vehicle or cleaning pads beat it.
Ordinary vehicles with the pads, you can effectively make vehicle interior floor to keep it clean, but as the installed pads, whether the overall appearance of the vehicle, the eyes of the beholder, the wise see wisdom.

4,Vehicle roof
Car roof after long-term use, they tend to accumulate a lot of dust in obscure places, where owners often also cleaned daily cleaning reach.
Roof cleaning method is usually the first high-power vacuum cleaner and a brush to clean a large area, and then focus on the places where clean dirt with a neutral detergent solution, and finally fully cleaned once. But it must be noted that the filler is headlining the acoustic insulation material, absorbent strong, cleaning cloth must do something, otherwise wet rag soaked roof material, then it is difficult to dry.

5, Other interior
For the steering wheel and transmission, brakes and other components in the car, you can suck moistened with a small brush or cloth upholstery cleaner fluid clean, preferably sprayed on the windshield glass coating products to prevent rain and snow or winter driving windows fog.

For more detailed information on auto parts and vehicle maintenance, visit the provider control arm manufacturers and car clutch manufacturers.

Winter must check the car air conditioning

For autumn and winter driving, the air conditioning system is functioning properly become the key drivers of the current car owners for some automotive air conditioning use and maintenance are poorly understood, here we suggest that the car  owners before the advent of winter into your car ready for examination , especially in the age of the car more than four years.

1. Clean car radiator and condenser.
The condenser and air-conditioning is an important part of The vehicle cooling system and air conditioning, if prolonged use of the vehicle, such as dust, sand, weeds and other cars will enter the gap between the tank and the condenser, which will affect water and air cooling performance.

2. Check the air conditioning pressure, replace the cooling medium
First check the pressure pipe and a low-pressure pipe were connected to the fluorine pressure detection table, the fluorine pressure gauge connection is completed, the vehicle ignition idling begins.
At this time the air conditioner switch is turned on, the air conditioning system starts running at maximum detection, detection of idle pressure should not exceed 300 high pressure, low pressure should not exceed 60 idle state.
After a few minutes idling, increase speed through to the oil pressure gauge to observe changes, and check the air conditioning compressor is functioning properly. Then remove the original system refrigerant, weight is generally between 250g-300g, received a gauge ready fluoride, generally two to three years is recommended car with a bottle or so, and some models can be added to two bottles.

3. Autumn and winter the right choice of a good oil.
To the autumn and winter many owners have complained costs of oil, in fact, in the autumn and winter, you can choose a lower viscosity oil, of course, this is also car in good condition, wear relatively small premise. For a few kilometers more, use a long old car should use a slightly larger viscosity lubricant.

4 How to clean air-conditioning duct, replace air filter?
Air conditioning filter life is changed every 12,000 km, this is generally under normal circumstances. Air duct cleaning method is very simple, it is clean with a damp towel stuck in the air conditioning vent, the air velocity to the maximum, so the dust will suck in the towel. Also, you can use the air-conditioning duct cleaning agents, auxiliary high-pressure air gun cleaning 2-3 times to achieve the goal of cleaning.

5.musty air conditioner should be how to clean up?
Some owners will find that when I open air, the outlet will be blown out musty, and this is the reason because there is no time to clean air channel. The easiest way is through the air conditioning duct cleaning to solve, just now we have already mentioned above, then the user can buy air cleaners to assist operations. When the air conditioning should not be turned off immediately after use, but continue to supply air blower switch is turned on for 5 minutes.

6. Proper use of air-conditioning cycle system
Vehicles must be careful when entering the winter, how to use the vehicle's Internal circulation system and The external circulation system, automatic air conditioning are now many models, and some models are manual air conditioning, then we have to pay attention. When using external circulation, air inlet air from outside the vehicle, while the inner loop is recirculated-air use.
Inner loop can improve the air conditioning effect, but the prolonged use of loop will reduce the air quality inside the vehicle, you may feel dizzy. Under normal circumstances suggest that you use the outer loop to allow fresh air into the car, to improve air quality.

7 film to reduce the temperature
In autumn and winter, many owners will be affixed to their car solar film, film with UV resistant, improve the efficiency of air conditioning, heat and so on. In general, the market is selling solar film for ultraviolet blocking more than 98%,for women owners is undoubtedly the best choice.

If your car has not been cleaned up a long-term, we recommend that you follow the above method to check, make travel in winter, become relaxed and happy.

For more details information about car maintenance and repair, visit:auto parts supplier,control arm manufacturers and car clutch manufacturers.

Car Clutch manufacturers--Clutch Pressure Plate OEM 41300-37300,41300-34020,41300-36620,MD701221,MB732544,41300-02010,41300-36020,41300-28021,41300-32000,41300-43300

Car Clutch 41300-37300

Parts Number:41300-37300

Parts:Clutch Pressure Plate
Description: Outside Diameter : 225 mm
             Inner Diameter : 148 mm
             P. C. D : 278 mm
For use:HYUNDAI、KIA
Application:HYUNDAI SANTAMO
            KIA JOICE


Car Clutch 41300-34020

Parts Number:41300-34020
Parts:Clutch Pressure Plate
Description:Outside Diameter : 215 mm
            Inner Diameter : 137 mm
            P. C. D : 263 mm
Application:HYUNDAI S COUPE (SLC)


Car Clutch 41300-36620

Parts Number:41300-36620

Parts:Clutch Pressure Plate
Description:Outside Diameter : 200 mm
            Inner Diameter : 127 mm
            P. C. D : 236 mm

Application:HYUNDAI LANTRA I (J-1)
            HYUNDAI S COUPE (SLC)
 

Car Clutch MD701221

Parts Number:MD701221

Parts:Clutch Pressure Plate
Description: Outside Diameter : 200 mm
             Inner Diameter : 130 mm
             P. C. D : 236 mm
Application:HYUNDAI ACCENT I (X-3)
            HYUNDAI ACCENT Saloon (X-3)
            HYUNDAI LANTRA I (J-1)
            HYUNDAI PONY (X-2)
            HYUNDAI PONY/EXCEL Saloon (X-2)
            HYUNDAI S COUPE (SLC)

Car Clutch MB732544

Parts Number:MB732544
Parts:Clutch Pressure Plate
Description: Outside Diameter : 225 mm
             Inner Diameter : 150 mm
             P. C. D : 262 mm
Application:HYUNDAI GALLOPER I
            HYUNDAI GALLOPER II (JK-01)

Car Clutch 41300-02010

Parts Number:41300-02010
Parts:Clutch Pressure Plate
Description:Outside Diameter: 180 mm
            Inner Diameter : 122 mm
            P. C. D : 218 mm
For use:CHRYSLER、HYUNDAI、KIA、MITSUBISHI

Application:HYUNDAI ATOS (MX)
            HYUNDAI ATOS PRIME (MX)
            KIA PICANTO (BA)

Car Clutch 41300-36020

Parts Number:41300-36020

Parts:Clutch Pressure Plate
Description:Outside Diameter: 184 mm
            Inner Diameter : 126.5 mm
            P. C. D : 239 mm
Application:HYUNDAI LANTRA I (J-1)
            HYUNDAI PONY (X-2)
            HYUNDAI PONY/EXCEL Saloon (X-2)
            HYUNDAI S COUPE (SLC)

Car Clutch 41300-28021

Parts Number:41300-28021
Parts:Clutch Pressure Plate
Description:Outside Diameter: 215 mm
            Inner Diameter : 140 mm
            P. C. D : 247 mm
Application:HYUNDAI COUPE (RD)
            HYUNDAI ELANTRA (XD)
            HYUNDAI ELANTRA Saloon (XD)
            HYUNDAI LANTRA II (J-2)
            HYUNDAI LANTRA II Wagon (J-2)



Car Clutch 41300-32000

Parts Number:41300-32000
Parts:Clutch Pressure Plate
Description:Outside Diameter : 215 mm
            Inner Diameter : 137.5 mm
            P. C. D : 263 mm
Application:HYUNDAI LANTRA I (J-1)
            HYUNDAI LANTRA II (J-2)
            HYUNDAI LANTRA II Wagon (J-2)
            HYUNDAI SONATA II (Y-2)
            HYUNDAI SONATA III (Y-3)

Car Clutch 41300-43300

Parts Number:41300-43300

Parts:Clutch Pressure Plate
Description:Outside Diameter: 225 mm
            Inner Diameter : 150 mm
            P. C. D : 264 mm
Application:HYUNDAI H100 Bus (P)
            HYUNDAI H100 Box

For more details control arm and Car Clutch,control arm manufacturers,Car Clutch manufacturers visit:http://www.domoautoparts.com/