Maintenance taken to avoid errors

       



Many owners over maintenance of the car, but did not know some of the car maintenance practices, and may even be harmful to his car, then for their car, how should we correct maintenance and avoid some incorrect way lead car maintenance damage it?

1.In the wheel repair, don't tire bolt and nut oil,Don't in the bolt and nut daub oil of the tire,Minority car owners in order to prevent rust on the wheel bolts and nuts, when installing the wheel nuts and bolts are coated with oil,little do they know this is wrong, and also to bring some traffic safety hazard.Tighten the bolts and nuts, mutual self-locking feature,and after applying oil, bolts and nuts self-locking coefficient becomes smaller, Self-locking performance degradation.Fast driving the car, it is easy to loose bolts and nuts, or even fall off, causing traffic accidents.

2.the summer, do not with water to wash inside the car body,car owners are often flush the auto body, and then wipe with a rag,china control arm manufacturers reminded private owners are:Car interior is best not to use water rinse.Because the cab,floor below cushion is not flat,cab floor cushion below the groove, through holes very much.After washing with water, deposited in the groove is not easy drying,or transmissions and other components from flowing through hole and lead to rust.Particularly good sealing performance cars can not be directly rinsed with water inside the car body.The correct way is to wipe with a damp cloth, but to avoid stagnant water.

3.different brands of coolant, do not mix, everyone knows that lack of engine coolant should be added in time,do you put a different brand of coolant mixed use of it? If it is,china control arm manufacturers advise you as early as possible to let go of the coolant ,re-add the same brand of coolant.Because different brands of coolant, it may be significant differences between the chemical properties, such as ferrous metals effective preservative, but often have a corrosive effect on aluminum products; whereas for aluminum alloy preservatives are harmful for ferroalloys.Since different brands of coolant, it uses a different preservative, it can not be mixed.

4 Do not step on the gas when you start the EFI cars, many of the driver's habits before starting the engine to step on the gas, especially in the winter when the cold start.However this method is not suitable for EFI cars.Engine is equipped with electronically controlled fuel injection device is different from ordinary carbureted engine, its fuel injection control device according to engine temperature, fuel supply is automatically adjusted so that the engine starts smoothly, even when cold start, fuel injection control device can automatically increase the amount of oil.When you start the engine EFI car, there is no need to step on the gas,don't in before the start of continuous step on the gas,otherwise it will lead to engine failure.

For more detailed information on auto parts and vehicle maintenance, visit the provider china control arm manufacturers and china car clutch manufacturers.